Skip To Main Content

How to use Toujeo®?

Toujeo® is available in two prefilled pens1:

Toujeo® is administrated in 6 simple steps1

  1. 1

    Check the pen

  • Check that the insulin is clear and transparent. Do not use the pen if the contents appear cloudy or colored.
  1. 2

    Attach needle

toujeo-step2
  • Use of needles: Be careful when using needles – this will prevent injuries from the needle and infecting others.
  1. 3

    Test for safety: check that your pen and needle are working properly.  Make sure you're getting the right dose of insulin.

toujeo-step3
  • Select 3 units by turning the dose adjustment ring until the dose arrow points to the dash between 2 and 4.
  • Press the injection button all the way down.
  • When insulin comes out of the tip of the needle, your pen is working properly.
  1. 4

    Select dosage

toujeo-step4
  1. 5

    Inject your dose - if you find it difficult to press the injection button, do not force it as this could break your pen.

toujeo-step5
  • Choose an injection site
  • Place your thumb on the injection button. Then press it fully and hold it down.
  • Do not press the injection button at an angle – your thumb could block the dose control ring so that it can no longer rotate.
  • Press and hold the injection button and when you see "0" in the dose window, slowly count to 5.
  • It guarantees that you inject the full dose.
  • After holding down and slowly counting to 5, release the injection button. Then pull the needle out of your skin.
  1. 6

    Remove the needle - be careful with the use of needles – this will prevent injuries from the needle and infecting others.

toujeo-step6

Relaterade Artiklar

MAT-BE-2500594 v.1.0 08/2025